Веб-консоль и CLI
Интерактивный интерфейс командной строки, доступный из браузера, SSH или последовательной консоли. Выполняйте диагностику, настраивайте инфраструктуру и устраняйте неполадки, не покидая устройство.
Несколько способов подключения
Получите доступ к TR7 CLI методом, который соответствует вашему рабочему процессу
Веб-консоль
Доступ к CLI непосредственно из браузера. Не требуется установка, не нужен SSH-клиент. Результаты появляются на том же экране.
SSH доступ
Безопасный доступ через оболочку для удалённого управления. Идеально подходит для написания скриптов, автоматизации и безопасного удалённого администрирования.
Последовательный порт / TTY
Внеполосный доступ к консоли через последовательный порт. Необходим для сценариев восстановления, когда сеть недоступна.
VGA / Консоль
Прямой доступ к консоли для физических устройств и виртуальных машин. Работает с консолями гипервизоров.
Диагностические инструменты sys-cmd
Мощные диагностические инструменты для устранения сетевых неполадок, анализа трафика и мониторинга системы
Сетевые инструменты
pingОтправка ICMP-эхо-запросовping6Отправка IPv6 ICMP-эхо-запросовtracerouteПоказать путь пакета до назначенияdigОтправка DNS-запросовnslookupЗапросы поиска DNSfpingБыстрый ping нескольких хостовHTTP-инструменты
curlHTTP/HTTPS клиентwgetКлиент загрузки файловh1loadНагрузочное тестирование HTTP/1wrkНагрузочное тестирование HTTPДиагностические инструменты
tcpdumpЗахват пакетов (вывод pcap)ssldumpАнализ протокола SSL/TLSsslscanСканер SSL/TLSnetstatСетевые соединения и статистикаssСтатистика сокетов (современный netstat)iftopИспользование полосы пропускания в реальном времениhtopИнтерактивный просмотр процессовnmapСетевое сканированиеСистемные инструменты
arpУправление ARP-таблицейarpingОтправка ARP-запросов хостамipПоказать информацию об IP и интерфейсеipcalcIP-калькуляторroute-tableУправление таблицей маршрутизацииfileУправление временными файламиncftpFTP-клиентtelnetTELNET протокол клиентextend-data-diskМастер расширения дискового пространства данныхdebugПереключить режим отладкиГотовность к расследованию
Выполняйте целенаправленную диагностику с устройства. Захватывайте трафик, тестируйте подключение, анализируйте SSL-рукопожатия - всё без SSH. Результаты могут быть сохранены в файлы для загрузки.
sys-cmd tcpdump -i eth0 -c 100 | to-file capture.pcapsys-cmd curl -I http://backend:8080/healthsys-cmd netstat -an | grep ESTABLISHED | wcФильтрация и преобразование вывода
Объединяйте до 8 команд конвейера для фильтрации, сортировки и сохранения вывода команд
grepФильтровать строки по шаблонуwcПодсчёт строк/слов/символовsortСортировать строкиheadПоказать первые N строкtailПоказать последние N строкuniqУдалить повторяющиеся строкиcutИзвлечь столбцыto-fileЗаписать в файлПример: Захват HTTP-трафика и сохранение в файл
sys-cmd tcpdump -c 100 | grep "HTTP" | to-file capture.txtСправочник команд
Поиск и изучение 400+ CLI-команд для конфигурации и управления
Выберите команду для просмотра деталей
Интерфейс веб-консоли
Посмотрите CLI в действии - диагностические команды из вашего браузера
Интерактивный CLI
Выполняйте диагностические команды непосредственно из веб-интерфейса. Автозаполнение по Tab, история команд и мгновенные результаты.
Вывод команд
Результаты отображаются мгновенно. Сохраняйте вывод в файлы для загрузки или пропускайте через фильтры для анализа.
Испытайте CLI
Посмотрите, как веб-консоль TR7 ускоряет устранение неполадок и управление конфигурацией
Справочник CLI-команд TR7
Полный список из 444 CLI-команд для веб-консоли TR7 и интерфейса командной строки.
network fw-rule add ?
Описание: Creates a new firewall rule (a security policy that controls inbound and outbound network traffic based on source/destination IPs, ports, and protocols, providing granular access control and network segmentation within route tables) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/fwRules
Категория: network / fwRules
Просмотреть документациюnetwork fw-rule set ?
Описание: Performs a complete replacement of a specific firewall rule (a security policy that controls inbound and outbound network traffic based on source/destination IPs, ports, and protocols, providing granular access control and network segmentation within route tables) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/fwRules/[id]
Категория: network / fwRules
Просмотреть документациюnetwork fw-rule update ?
Описание: Performs a selective update of a specific firewall rule (a security policy that controls inbound and outbound network traffic based on source/destination IPs, ports, and protocols, providing granular access control and network segmentation within route tables) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/fwRules/[id]
Категория: network / fwRules
Просмотреть документациюnetwork namespace add ?
Описание: Creates a new route table (a per-tenant routing domain that isolates interfaces, IPs, routes, and policies for clarity and operational safety) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/namespaces
Категория: network / namespaces
Просмотреть документациюnetwork namespace set ?
Описание: Performs a complete replacement of a specific route table (a per-tenant routing domain that isolates interfaces, IPs, routes, and policies for clarity and operational safety) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/namespaces/[id]
Категория: network / namespaces
Просмотреть документациюnetwork namespace update ?
Описание: Performs a selective update of a specific route table (a per-tenant routing domain that isolates interfaces, IPs, routes, and policies for clarity and operational safety) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/namespaces/[id]
Категория: network / namespaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific physical ethernet interface (a physical ethernet network card interface on the server; allows configuration of IP address, netmask, gateway, MTU, flow control, and other L2/L3 parameters; includes link status, speed/duplex settings, promiscuous mode, and NIC statistics monitoring features; used for direct physical network connectivity) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific physical ethernet interface (a physical ethernet network card interface on the server; allows configuration of IP address, netmask, gateway, MTU, flow control, and other L2/L3 parameters; includes link status, speed/duplex settings, promiscuous mode, and NIC statistics monitoring features; used for direct physical network connectivity) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new VLAN virtual interface (a virtual network interface created via VLAN tagging on a physical ethernet interface according to IEEE 802.1Q standard; sends and receives tagged traffic with specified VLAN ID; used for network segmentation, traffic isolation, and multi-L3 network configuration; requires parent physical interface and VLAN ID specification) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific VLAN virtual interface (a virtual network interface created via VLAN tagging on a physical ethernet interface according to IEEE 802.1Q standard; sends and receives tagged traffic with specified VLAN ID; used for network segmentation, traffic isolation, and multi-L3 network configuration; requires parent physical interface and VLAN ID specification) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific VLAN virtual interface (a virtual network interface created via VLAN tagging on a physical ethernet interface according to IEEE 802.1Q standard; sends and receives tagged traffic with specified VLAN ID; used for network segmentation, traffic isolation, and multi-L3 network configuration; requires parent physical interface and VLAN ID specification) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new macvtap virtual interface (a virtual interface that provides network connectivity using macvtap driver which creates MAC address-based virtual interfaces on physical interfaces; supports bridge/vepa/private/passthrough modes; provides high-performance direct MAC-level access for virtual machine and container network connectivity; requires parent physical interface and mode selection) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific macvtap virtual interface (a virtual interface that provides network connectivity using macvtap driver which creates MAC address-based virtual interfaces on physical interfaces; supports bridge/vepa/private/passthrough modes; provides high-performance direct MAC-level access for virtual machine and container network connectivity; requires parent physical interface and mode selection) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific macvtap virtual interface (a virtual interface that provides network connectivity using macvtap driver which creates MAC address-based virtual interfaces on physical interfaces; supports bridge/vepa/private/passthrough modes; provides high-performance direct MAC-level access for virtual machine and container network connectivity; requires parent physical interface and mode selection) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new veth peer virtual interface (a veth (virtual ethernet) interface that works like a virtual ethernet cable pair with two ends connected to each other; packets sent from one end are received at the other end; used to establish point-to-point connections between network namespaces and containers, enabling traffic flow between bridges and routing tables; peer interface name must be specified) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific veth peer virtual interface (a veth (virtual ethernet) interface that works like a virtual ethernet cable pair with two ends connected to each other; packets sent from one end are received at the other end; used to establish point-to-point connections between network namespaces and containers, enabling traffic flow between bridges and routing tables; peer interface name must be specified) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific veth peer virtual interface (a veth (virtual ethernet) interface that works like a virtual ethernet cable pair with two ends connected to each other; packets sent from one end are received at the other end; used to establish point-to-point connections between network namespaces and containers, enabling traffic flow between bridges and routing tables; peer interface name must be specified) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new bond aggregate interface (an aggregate interface that combines multiple physical ethernet interfaces into a single logical interface; supports bonding modes like balance-rr, active-backup, balance-xor, broadcast, 802.3ad; provides network bandwidth increase, load balancing, and redundancy; slave interfaces, primary interface, and bonding options are configurable) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific bond aggregate interface (an aggregate interface that combines multiple physical ethernet interfaces into a single logical interface; supports bonding modes like balance-rr, active-backup, balance-xor, broadcast, 802.3ad; provides network bandwidth increase, load balancing, and redundancy; slave interfaces, primary interface, and bonding options are configurable) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific bond aggregate interface (an aggregate interface that combines multiple physical ethernet interfaces into a single logical interface; supports bonding modes like balance-rr, active-backup, balance-xor, broadcast, 802.3ad; provides network bandwidth increase, load balancing, and redundancy; slave interfaces, primary interface, and bonding options are configurable) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new LACP aggregate interface (an advanced aggregate interface that dynamically combines multiple physical ethernet interfaces using IEEE 802.3ad Link Aggregation Control Protocol; automatically forms link aggregation group with peer device via LACP PDUs; provides high bandwidth, automatic failover, load balancing, and standards-compliant multi-link connectivity; LACP system priority, port priority, and aggregation key are configurable) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific LACP aggregate interface (an advanced aggregate interface that dynamically combines multiple physical ethernet interfaces using IEEE 802.3ad Link Aggregation Control Protocol; automatically forms link aggregation group with peer device via LACP PDUs; provides high bandwidth, automatic failover, load balancing, and standards-compliant multi-link connectivity; LACP system priority, port priority, and aggregation key are configurable) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific LACP aggregate interface (an advanced aggregate interface that dynamically combines multiple physical ethernet interfaces using IEEE 802.3ad Link Aggregation Control Protocol; automatically forms link aggregation group with peer device via LACP PDUs; provides high bandwidth, automatic failover, load balancing, and standards-compliant multi-link connectivity; LACP system priority, port priority, and aggregation key are configurable) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface add ?
Описание: Creates a new bridge virtual interface (a software bridge interface that combines multiple network interfaces at L2 level to form a single broadcast domain; provides MAC address learning, forwarding table management, and STP (Spanning Tree Protocol) support; used for network switching for virtual machines and containers, VLAN-aware bridge configuration, and L2 communication between network segments) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/interfaces
Категория: network / interfaces
Просмотреть документациюnetwork interface set ?
Описание: Performs a complete replacement of a specific bridge virtual interface (a software bridge interface that combines multiple network interfaces at L2 level to form a single broadcast domain; provides MAC address learning, forwarding table management, and STP (Spanning Tree Protocol) support; used for network switching for virtual machines and containers, VLAN-aware bridge configuration, and L2 communication between network segments) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork interface update ?
Описание: Performs a selective update of a specific bridge virtual interface (a software bridge interface that combines multiple network interfaces at L2 level to form a single broadcast domain; provides MAC address learning, forwarding table management, and STP (Spanning Tree Protocol) support; used for network switching for virtual machines and containers, VLAN-aware bridge configuration, and L2 communication between network segments) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/interfaces/[id]
Категория: network / interfaces
Просмотреть документациюnetwork ip add ?
Описание: Creates a new IP address (a unique network identifier assigned to an interface that enables the device to communicate on IP networks, supporting both IPv4 and IPv6 with CIDR notation for flexible subnetting) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/ips
Категория: network / ips
Просмотреть документациюnetwork ip set ?
Описание: Performs a complete replacement of a specific IP address (a unique network identifier assigned to an interface that enables the device to communicate on IP networks, supporting both IPv4 and IPv6 with CIDR notation for flexible subnetting) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/ips/[id]
Категория: network / ips
Просмотреть документациюnetwork ip update ?
Описание: Performs a selective update of a specific IP address (a unique network identifier assigned to an interface that enables the device to communicate on IP networks, supporting both IPv4 and IPv6 with CIDR notation for flexible subnetting) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/ips/[id]
Категория: network / ips
Просмотреть документациюnetwork route add ?
Описание: Creates a new static route (a manually configured routing entry that directs network traffic to specific destinations through designated gateways, essential for multi-subnet environments and custom traffic steering) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /network/[zoneId]/routes
Категория: network / routes
Просмотреть документациюnetwork route set ?
Описание: Performs a complete replacement of a specific static route (a manually configured routing entry that directs network traffic to specific destinations through designated gateways, essential for multi-subnet environments and custom traffic steering) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /network/[zoneId]/routes/[id]
Категория: network / routes
Просмотреть документациюnetwork route update ?
Описание: Performs a selective update of a specific static route (a manually configured routing entry that directs network traffic to specific destinations through designated gateways, essential for multi-subnet environments and custom traffic steering) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /network/[zoneId]/routes/[id]
Категория: network / routes
Просмотреть документациюwaf options show ?
Описание: Retrieves the complete current configuration of WAF configuration (global Web Application Firewall settings managing OWASP protection levels, structure and argument validation, blacklist IP protection, custom blocking pages, body processing limits, behavioral collective learning from traffic patterns, trusted source teaching mode, and analysis capabilities with scheduled email reporting). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /waf/[poolId]/options
Категория: waf / options
Просмотреть документациюwaf options update ?
Описание: Performs a selective update of WAF configuration (global Web Application Firewall settings managing OWASP protection levels, structure and argument validation, blacklist IP protection, custom blocking pages, body processing limits, behavioral collective learning from traffic patterns, trusted source teaching mode, and analysis capabilities with scheduled email reporting) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /waf/[poolId]/options
Категория: waf / options
Просмотреть документациюwaf hostGroups add ?
Описание: Creates a new host group (a WAF grouping configuration that organizes domain names with configurable operation mode including blocking to prevent attacks, detection for monitoring only, or disabled, enabling flexible WAF policy application across different applications and environments) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /waf/[poolId]/hostGroups
Категория: waf / hostGroups
Просмотреть документациюwaf hostGroups set ?
Описание: Performs a complete replacement of a specific host group (a WAF grouping configuration that organizes domain names with configurable operation mode including blocking to prevent attacks, detection for monitoring only, or disabled, enabling flexible WAF policy application across different applications and environments) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /waf/[poolId]/hostGroups/[id]
Категория: waf / hostGroups
Просмотреть документациюwaf hostGroups update ?
Описание: Performs a selective update of a specific host group (a WAF grouping configuration that organizes domain names with configurable operation mode including blocking to prevent attacks, detection for monitoring only, or disabled, enabling flexible WAF policy application across different applications and environments) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /waf/[poolId]/hostGroups/[id]
Категория: waf / hostGroups
Просмотреть документациюgtm service add ?
Описание: Creates a new DNS service (a DNS service for Global Traffic Management listening on IP:port frontends with query forwarding to upstream DNS servers, DNS response caching with TTL and max entries, QoS management with CPU/memory limits, and logging) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmDns
Категория: gtm / gtmDns
Просмотреть документациюgtm service set ?
Описание: Performs a complete replacement of a specific DNS service (a DNS service for Global Traffic Management listening on IP:port frontends with query forwarding to upstream DNS servers, DNS response caching with TTL and max entries, QoS management with CPU/memory limits, and logging) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmDns/[id]
Категория: gtm / gtmDns
Просмотреть документациюgtm service update ?
Описание: Performs a selective update of a specific DNS service (a DNS service for Global Traffic Management listening on IP:port frontends with query forwarding to upstream DNS servers, DNS response caching with TTL and max entries, QoS management with CPU/memory limits, and logging) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmDns/[id]
Категория: gtm / gtmDns
Просмотреть документациюgtm dns-record add ?
Описание: Creates a new DNS record (a comprehensive DNS record configuration with multi-datacenter support including DNS record types like A, AAAA, CNAME, datacenter-specific records, health check-based routing, disaster recovery scenario, intelligent datacenter selection (host, service, client-based), balance algorithm, and fail-safe fallback records) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmDnsRecords/[dnsId]
Категория: gtm / gtmDnsRecords
Просмотреть документациюgtm dns-record set ?
Описание: Performs a complete replacement of a specific DNS record (a comprehensive DNS record configuration with multi-datacenter support including DNS record types like A, AAAA, CNAME, datacenter-specific records, health check-based routing, disaster recovery scenario, intelligent datacenter selection (host, service, client-based), balance algorithm, and fail-safe fallback records) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmDnsRecords/[dnsId]/[id]
Категория: gtm / gtmDnsRecords
Просмотреть документациюgtm dns-record update ?
Описание: Performs a selective update of a specific DNS record (a comprehensive DNS record configuration with multi-datacenter support including DNS record types like A, AAAA, CNAME, datacenter-specific records, health check-based routing, disaster recovery scenario, intelligent datacenter selection (host, service, client-based), balance algorithm, and fail-safe fallback records) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmDnsRecords/[dnsId]/[id]
Категория: gtm / gtmDnsRecords
Просмотреть документациюgtm dns-domain add ?
Описание: Creates a new domain (a DNS domain/zone configuration with working mode support (standalone, disaster recovery, or datacenter mode), default datacenter configuration, zone transfer for slave servers, DNSSEC support, and SOA serial format selection) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmDnsDomains/[dnsId]
Категория: gtm / gtmDnsDomains
Просмотреть документациюgtm dns-domain set ?
Описание: Performs a complete replacement of a specific domain (a DNS domain/zone configuration with working mode support (standalone, disaster recovery, or datacenter mode), default datacenter configuration, zone transfer for slave servers, DNSSEC support, and SOA serial format selection) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmDnsDomains/[dnsId]/[id]
Категория: gtm / gtmDnsDomains
Просмотреть документациюgtm dns-domain update ?
Описание: Performs a selective update of a specific domain (a DNS domain/zone configuration with working mode support (standalone, disaster recovery, or datacenter mode), default datacenter configuration, zone transfer for slave servers, DNSSEC support, and SOA serial format selection) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmDnsDomains/[dnsId]/[id]
Категория: gtm / gtmDnsDomains
Просмотреть документациюgtm forwarder-profile add ?
Описание: Creates a new DNS forwarder profile (a DNS forwarding configuration forwarding DNS queries to upstream DNS servers with default forwarding addresses and custom forwarding rules for specific domains) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmForwarders
Категория: gtm / gtmForwarders
Просмотреть документациюgtm forwarder-profile set ?
Описание: Performs a complete replacement of a specific DNS forwarder profile (a DNS forwarding configuration forwarding DNS queries to upstream DNS servers with default forwarding addresses and custom forwarding rules for specific domains) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmForwarders/[id]
Категория: gtm / gtmForwarders
Просмотреть документациюgtm forwarder-profile update ?
Описание: Performs a selective update of a specific DNS forwarder profile (a DNS forwarding configuration forwarding DNS queries to upstream DNS servers with default forwarding addresses and custom forwarding rules for specific domains) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmForwarders/[id]
Категория: gtm / gtmForwarders
Просмотреть документациюgtm data-center-remote add ?
Описание: Creates a new datacenter (other TR7 GTM applications/devices for geo-distributed DNS traffic management, defined with WAN and LAN access addresses for communication, access period, and successful/failed check thresholds for marking healthy/unhealthy) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmDataCenters
Категория: gtm / gtmDataCenters
Просмотреть документациюgtm data-center-remote set ?
Описание: Performs a complete replacement of a specific datacenter (other TR7 GTM applications/devices for geo-distributed DNS traffic management, defined with WAN and LAN access addresses for communication, access period, and successful/failed check thresholds for marking healthy/unhealthy) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmDataCenters/[id]
Категория: gtm / gtmDataCenters
Просмотреть документациюgtm data-center-remote update ?
Описание: Performs a selective update of a specific datacenter (other TR7 GTM applications/devices for geo-distributed DNS traffic management, defined with WAN and LAN access addresses for communication, access period, and successful/failed check thresholds for marking healthy/unhealthy) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmDataCenters/[id]
Категория: gtm / gtmDataCenters
Просмотреть документациюgtm hc add ?
Описание: Creates a new health check (a GTM health check profile extending ADC health check features with GTM-specific datacenter checking, supporting protocols including ping, TCP, HTTP, HTTPS, UDP, DNS, and datacenter check types like internet check and pool statistics check) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmHc
Категория: gtm / gtmHc
Просмотреть документациюgtm hc set ?
Описание: Performs a complete replacement of a specific health check (a GTM health check profile extending ADC health check features with GTM-specific datacenter checking, supporting protocols including ping, TCP, HTTP, HTTPS, UDP, DNS, and datacenter check types like internet check and pool statistics check) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmHc/[id]
Категория: gtm / gtmHc
Просмотреть документациюgtm hc update ?
Описание: Performs a selective update of a specific health check (a GTM health check profile extending ADC health check features with GTM-specific datacenter checking, supporting protocols including ping, TCP, HTTP, HTTPS, UDP, DNS, and datacenter check types like internet check and pool statistics check) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmHc/[id]
Категория: gtm / gtmHc
Просмотреть документациюgtm scenario add ?
Описание: Creates a new health scenario (a health check scenario for dynamic GTM configuration changes with activation and deactivation triggers based on health check conditions, auto or manual activation modes, and activation/deactivation check conditions) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmHcScenarios
Категория: gtm / gtmHcScenarios
Просмотреть документациюgtm scenario set ?
Описание: Performs a complete replacement of a specific health scenario (a health check scenario for dynamic GTM configuration changes with activation and deactivation triggers based on health check conditions, auto or manual activation modes, and activation/deactivation check conditions) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmHcScenarios/[id]
Категория: gtm / gtmHcScenarios
Просмотреть документациюgtm scenario update ?
Описание: Performs a selective update of a specific health scenario (a health check scenario for dynamic GTM configuration changes with activation and deactivation triggers based on health check conditions, auto or manual activation modes, and activation/deactivation check conditions) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmHcScenarios/[id]
Категория: gtm / gtmHcScenarios
Просмотреть документациюgtm trigger add ?
Описание: Creates a new trigger action (a GTM event trigger profile that can be executed when health scenarios activate/deactivate, supporting HTTP/HTTPS webhooks, oracle scripts, and other trigger types with IP:port address configuration, HTTP method/headers/body, and expected status codes) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmTriggers
Категория: gtm / gtmTriggers
Просмотреть документациюgtm trigger set ?
Описание: Performs a complete replacement of a specific trigger action (a GTM event trigger profile that can be executed when health scenarios activate/deactivate, supporting HTTP/HTTPS webhooks, oracle scripts, and other trigger types with IP:port address configuration, HTTP method/headers/body, and expected status codes) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmTriggers/[id]
Категория: gtm / gtmTriggers
Просмотреть документациюgtm trigger update ?
Описание: Performs a selective update of a specific trigger action (a GTM event trigger profile that can be executed when health scenarios activate/deactivate, supporting HTTP/HTTPS webhooks, oracle scripts, and other trigger types with IP:port address configuration, HTTP method/headers/body, and expected status codes) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmTriggers/[id]
Категория: gtm / gtmTriggers
Просмотреть документациюgtm express-profile add ?
Описание: Creates a new express profile (an express configuration profile for master/slave DNS record synchronization with master IP:port addresses and identifier pattern) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /gtm/gtmRecordMgmt
Категория: gtm / gtmRecordMgmt
Просмотреть документациюgtm express-profile set ?
Описание: Performs a complete replacement of a specific express profile (an express configuration profile for master/slave DNS record synchronization with master IP:port addresses and identifier pattern) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /gtm/gtmRecordMgmt/[id]
Категория: gtm / gtmRecordMgmt
Просмотреть документациюgtm express-profile update ?
Описание: Performs a selective update of a specific express profile (an express configuration profile for master/slave DNS record synchronization with master IP:port addresses and identifier pattern) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /gtm/gtmRecordMgmt/[id]
Категория: gtm / gtmRecordMgmt
Просмотреть документациюgtm data-center-local show ?
Описание: Retrieves the complete current configuration of local datacenter settings (local GTM datacenter identity and reachability configuration with access addresses (namespace, IP, port) for remote datacenters to reach this device, health scenario for internet connectivity check, and maintenance mode). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /gtm/localDcSettings
Категория: gtm / localDcSettings
Просмотреть документациюgtm data-center-local update ?
Описание: Performs a selective update of local datacenter settings (local GTM datacenter identity and reachability configuration with access addresses (namespace, IP, port) for remote datacenters to reach this device, health scenario for internet connectivity check, and maintenance mode) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /gtm/localDcSettings
Категория: gtm / localDcSettings
Просмотреть документациюags gateway add ?
Описание: Creates a new access service (an Application Access Manager instance that orchestrates authentication journeys with an action flowchart, multiple actions including authentication providers, MFA, forms, decision points, and user attribute assignment, capable of operating in web, API, or portal mode with customizable page templates, dictionaries, and security profiles) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsGateways
Категория: ags / agsGateways
Просмотреть документациюags gateway set ?
Описание: Performs a complete replacement of a specific access service (an Application Access Manager instance that orchestrates authentication journeys with an action flowchart, multiple actions including authentication providers, MFA, forms, decision points, and user attribute assignment, capable of operating in web, API, or portal mode with customizable page templates, dictionaries, and security profiles) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsGateways/[id]
Категория: ags / agsGateways
Просмотреть документациюags gateway update ?
Описание: Performs a selective update of a specific access service (an Application Access Manager instance that orchestrates authentication journeys with an action flowchart, multiple actions including authentication providers, MFA, forms, decision points, and user attribute assignment, capable of operating in web, API, or portal mode with customizable page templates, dictionaries, and security profiles) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsGateways/[id]
Категория: ags / agsGateways
Просмотреть документациюags authentication-server add ?
Описание: Creates a new authentication server (a backend authentication server configuration referenced by authentication providers with protocols supporting LDAP, RADIUS, HTTP, OAuth2, OIDC, and SAML, load balancing for multi-host configurations, SSL/TLS security settings, connection pool management, and health checking) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationServers
Категория: ags / agsAuthenticationServers
Просмотреть документациюags authentication-server set ?
Описание: Performs a complete replacement of a specific authentication server (a backend authentication server configuration referenced by authentication providers with protocols supporting LDAP, RADIUS, HTTP, OAuth2, OIDC, and SAML, load balancing for multi-host configurations, SSL/TLS security settings, connection pool management, and health checking) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationServers/[id]
Категория: ags / agsAuthenticationServers
Просмотреть документациюags authentication-server update ?
Описание: Performs a selective update of a specific authentication server (a backend authentication server configuration referenced by authentication providers with protocols supporting LDAP, RADIUS, HTTP, OAuth2, OIDC, and SAML, load balancing for multi-host configurations, SSL/TLS security settings, connection pool management, and health checking) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationServers/[id]
Категория: ags / agsAuthenticationServers
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new OAuth2 provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific OAuth2 provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific OAuth2 provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new OpenID Connect provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific OpenID Connect provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific OpenID Connect provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new SAML provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific SAML provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific SAML provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new LDAP provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific LDAP provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific LDAP provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new HTTP provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific HTTP provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific HTTP provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new certificate provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific certificate provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific certificate provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new database provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific database provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific database provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new RADIUS provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific RADIUS provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific RADIUS provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new portal provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific portal provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific portal provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider add ?
Описание: Creates a new web form provider instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsAuthenticationProviders
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider set ?
Описание: Performs a complete replacement of a specific web form provider instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags authentication-provider update ?
Описание: Performs a selective update of a specific web form provider instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsAuthenticationProviders/[id]
Категория: ags / agsAuthenticationProviders
Просмотреть документациюags local-database add ?
Описание: Creates a new local database (a local authentication database configuration storing local user accounts for AAM services with password policy (minimum length)) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsLocalDatabases
Категория: ags / agsLocalDatabases
Просмотреть документациюags local-database set ?
Описание: Performs a complete replacement of a specific local database (a local authentication database configuration storing local user accounts for AAM services with password policy (minimum length)) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsLocalDatabases/[id]
Категория: ags / agsLocalDatabases
Просмотреть документациюags local-database update ?
Описание: Performs a selective update of a specific local database (a local authentication database configuration storing local user accounts for AAM services with password policy (minimum length)) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsLocalDatabases/[id]
Категория: ags / agsLocalDatabases
Просмотреть документациюags local-user add ?
Описание: Creates a new local user (a user account stored in a local database with email and custom attributes, usable for AAM authentication) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/agsLocalUsers
Категория: ags / agsLocalUsers
Просмотреть документациюags local-user set ?
Описание: Performs a complete replacement of a specific local user (a user account stored in a local database with email and custom attributes, usable for AAM authentication) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/agsLocalUsers/[id]
Категория: ags / agsLocalUsers
Просмотреть документациюags local-user update ?
Описание: Performs a selective update of a specific local user (a user account stored in a local database with email and custom attributes, usable for AAM authentication) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/agsLocalUsers/[id]
Категория: ags / agsLocalUsers
Просмотреть документациюags forms add ?
Описание: Creates a new form (a form builder configuration for creating custom login forms and user input pages used in authentication flows, supporting rich field types like text, password, email, select, checkbox, radio, file upload, submit button, button group, divider, and custom HTML with validation, placeholder, help text, and conditional logic) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/agsForms
Категория: ags / profiles
Просмотреть документациюags forms set ?
Описание: Performs a complete replacement of a specific form (a form builder configuration for creating custom login forms and user input pages used in authentication flows, supporting rich field types like text, password, email, select, checkbox, radio, file upload, submit button, button group, divider, and custom HTML with validation, placeholder, help text, and conditional logic) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/agsForms/[id]
Категория: ags / profiles
Просмотреть документациюags forms update ?
Описание: Performs a selective update of a specific form (a form builder configuration for creating custom login forms and user input pages used in authentication flows, supporting rich field types like text, password, email, select, checkbox, radio, file upload, submit button, button group, divider, and custom HTML with validation, placeholder, help text, and conditional logic) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/agsForms/[id]
Категория: ags / profiles
Просмотреть документациюags mfas add ?
Описание: Creates a new MFA configuration (a multi-factor authentication configuration supporting email OTP (length, expiration, resend settings) and TOTP authenticator app (algorithm, digits, period, time drift tolerance, backup codes) methods with optional conditions, "trust this device" option, and lockout policy integration) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/agsMFAs
Категория: ags / profiles
Просмотреть документациюags mfas set ?
Описание: Performs a complete replacement of a specific MFA configuration (a multi-factor authentication configuration supporting email OTP (length, expiration, resend settings) and TOTP authenticator app (algorithm, digits, period, time drift tolerance, backup codes) methods with optional conditions, "trust this device" option, and lockout policy integration) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/agsMFAs/[id]
Категория: ags / profiles
Просмотреть документациюags mfas update ?
Описание: Performs a selective update of a specific MFA configuration (a multi-factor authentication configuration supporting email OTP (length, expiration, resend settings) and TOTP authenticator app (algorithm, digits, period, time drift tolerance, backup codes) methods with optional conditions, "trust this device" option, and lockout policy integration) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/agsMFAs/[id]
Категория: ags / profiles
Просмотреть документациюags profiles page-templates add ?
Описание: Creates a new page template (a comprehensive UI branding and appearance customization configuration for authentication pages including page title, favicon, header/footer logo and content, brand color, background image and opacity, with dark mode support) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/agsPageTemplates
Категория: ags / profiles
Просмотреть документациюags profiles page-templates set ?
Описание: Performs a complete replacement of a specific page template (a comprehensive UI branding and appearance customization configuration for authentication pages including page title, favicon, header/footer logo and content, brand color, background image and opacity, with dark mode support) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/agsPageTemplates/[id]
Категория: ags / profiles
Просмотреть документациюags profiles page-templates update ?
Описание: Performs a selective update of a specific page template (a comprehensive UI branding and appearance customization configuration for authentication pages including page title, favicon, header/footer logo and content, brand color, background image and opacity, with dark mode support) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/agsPageTemplates/[id]
Категория: ags / profiles
Просмотреть документациюags profiles dictionaries add ?
Описание: Creates a new dictionary (an internationalization dictionary configuration for dynamic translation in authentication flows with supported languages and key-language-value translation entries including smart variable support) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/agsDictionaries
Категория: ags / profiles
Просмотреть документациюags profiles dictionaries set ?
Описание: Performs a complete replacement of a specific dictionary (an internationalization dictionary configuration for dynamic translation in authentication flows with supported languages and key-language-value translation entries including smart variable support) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/agsDictionaries/[id]
Категория: ags / profiles
Просмотреть документациюags profiles dictionaries update ?
Описание: Performs a selective update of a specific dictionary (an internationalization dictionary configuration for dynamic translation in authentication flows with supported languages and key-language-value translation entries including smart variable support) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/agsDictionaries/[id]
Категория: ags / profiles
Просмотреть документациюags security lockoutPolicies add ?
Описание: Creates a new lockout policy (an account lockout policy preventing brute force attacks with failed attempt counting by username, IP, or custom components, progressive enforcement including warning display, CAPTCHA protection, and final lockout with configurable thresholds, durations, and attempt window) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/security/agsLockoutPolicies
Категория: ags / profiles
Просмотреть документациюags security lockoutPolicies set ?
Описание: Performs a complete replacement of a specific lockout policy (an account lockout policy preventing brute force attacks with failed attempt counting by username, IP, or custom components, progressive enforcement including warning display, CAPTCHA protection, and final lockout with configurable thresholds, durations, and attempt window) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/security/agsLockoutPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security lockoutPolicies update ?
Описание: Performs a selective update of a specific lockout policy (an account lockout policy preventing brute force attacks with failed attempt counting by username, IP, or custom components, progressive enforcement including warning display, CAPTCHA protection, and final lockout with configurable thresholds, durations, and attempt window) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/security/agsLockoutPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security sessionProtectionPolicies add ?
Описание: Creates a new session protection policy (a session security policy preventing session hijacking with session binding to IP, user agent, or custom components, maximum concurrent session limit, deny or killOldest action when limit exceeded, and whitelist condition) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/security/agsSessionProtectionPolicies
Категория: ags / profiles
Просмотреть документациюags security sessionProtectionPolicies set ?
Описание: Performs a complete replacement of a specific session protection policy (a session security policy preventing session hijacking with session binding to IP, user agent, or custom components, maximum concurrent session limit, deny or killOldest action when limit exceeded, and whitelist condition) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/security/agsSessionProtectionPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security sessionProtectionPolicies update ?
Описание: Performs a selective update of a specific session protection policy (a session security policy preventing session hijacking with session binding to IP, user agent, or custom components, maximum concurrent session limit, deny or killOldest action when limit exceeded, and whitelist condition) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/security/agsSessionProtectionPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security rateLimitPolicies add ?
Описание: Creates a new bot protection policy (a bot detection and mitigation policy detecting bot activity with request rate, risk score, or static triggers across global, IP, username, or custom scopes, with configurable thresholds and time windows including mitigation actions: allow, deny, block, delay, progressive delay, captcha, or bandwidth limiting) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/security/agsBotProtectionPolicies
Категория: ags / profiles
Просмотреть документациюags security rateLimitPolicies set ?
Описание: Performs a complete replacement of a specific bot protection policy (a bot detection and mitigation policy detecting bot activity with request rate, risk score, or static triggers across global, IP, username, or custom scopes, with configurable thresholds and time windows including mitigation actions: allow, deny, block, delay, progressive delay, captcha, or bandwidth limiting) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/security/agsBotProtectionPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security rateLimitPolicies update ?
Описание: Performs a selective update of a specific bot protection policy (a bot detection and mitigation policy detecting bot activity with request rate, risk score, or static triggers across global, IP, username, or custom scopes, with configurable thresholds and time windows including mitigation actions: allow, deny, block, delay, progressive delay, captcha, or bandwidth limiting) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/security/agsBotProtectionPolicies/[id]
Категория: ags / profiles
Просмотреть документациюags security captchaProviders add ?
Описание: Creates a new captcha provider (a CAPTCHA integration for bot protection featuring built-in TR7 captcha with text, math, and image types and additionally supporting 3rd party providers including Google reCAPTCHA (v2, v3), Cloudflare Turnstile, and hCaptcha, with site/secret key configuration, difficulty/threshold settings, solved captcha validity duration, max attempts, and network namespace selection) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/security/agsCaptchaProviders
Категория: ags / profiles
Просмотреть документациюags security captchaProviders set ?
Описание: Performs a complete replacement of a specific captcha provider (a CAPTCHA integration for bot protection featuring built-in TR7 captcha with text, math, and image types and additionally supporting 3rd party providers including Google reCAPTCHA (v2, v3), Cloudflare Turnstile, and hCaptcha, with site/secret key configuration, difficulty/threshold settings, solved captcha validity duration, max attempts, and network namespace selection) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/security/agsCaptchaProviders/[id]
Категория: ags / profiles
Просмотреть документациюags security captchaProviders update ?
Описание: Performs a selective update of a specific captcha provider (a CAPTCHA integration for bot protection featuring built-in TR7 captcha with text, math, and image types and additionally supporting 3rd party providers including Google reCAPTCHA (v2, v3), Cloudflare Turnstile, and hCaptcha, with site/secret key configuration, difficulty/threshold settings, solved captcha validity duration, max attempts, and network namespace selection) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/security/agsCaptchaProviders/[id]
Категория: ags / profiles
Просмотреть документациюags security profiles add ?
Описание: Creates a new security profile (a security configuration aggregating all security policies into a single profile assignable to AAM gateways with bot protection policies, lockout policy, session protection policy, default lockout policies, risk score factors, and device fingerprint fields) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /ags/profiles/security/agsGatewaySecurities
Категория: ags / profiles
Просмотреть документациюags security profiles set ?
Описание: Performs a complete replacement of a specific security profile (a security configuration aggregating all security policies into a single profile assignable to AAM gateways with bot protection policies, lockout policy, session protection policy, default lockout policies, risk score factors, and device fingerprint fields) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /ags/profiles/security/agsGatewaySecurities/[id]
Категория: ags / profiles
Просмотреть документациюags security profiles update ?
Описание: Performs a selective update of a specific security profile (a security configuration aggregating all security policies into a single profile assignable to AAM gateways with bot protection policies, lockout policy, session protection policy, default lockout policies, risk score factors, and device fingerprint fields) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /ags/profiles/security/agsGatewaySecurities/[id]
Категория: ags / profiles
Просмотреть документациюlb service add ?
Описание: Creates a new HTTP vService (an L7 HTTP/HTTPS application delivery service; with virtual hosting, SSL termination, WAF protection, HTTP compression, web caching, X-Forwarded-For header injection, debug mode, L7 DDOS profiles, conditional backend group routing, URI/header/cookie-based load balancing algorithms, server/TR7 cookie persistence, dynamic hash-based persistence, bandwidth limiting, QoS resource management (CPU/memory limits), timeout/pool limit/log/notification/report profiles, HTTP traffic actions and conditions support for comprehensive HTTP/HTTPS load balancing) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbPools
Категория: lb / lbPools
Просмотреть документациюlb service set ?
Описание: Performs a complete replacement of a specific HTTP vService (an L7 HTTP/HTTPS application delivery service; with virtual hosting, SSL termination, WAF protection, HTTP compression, web caching, X-Forwarded-For header injection, debug mode, L7 DDOS profiles, conditional backend group routing, URI/header/cookie-based load balancing algorithms, server/TR7 cookie persistence, dynamic hash-based persistence, bandwidth limiting, QoS resource management (CPU/memory limits), timeout/pool limit/log/notification/report profiles, HTTP traffic actions and conditions support for comprehensive HTTP/HTTPS load balancing) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb service update ?
Описание: Performs a selective update of a specific HTTP vService (an L7 HTTP/HTTPS application delivery service; with virtual hosting, SSL termination, WAF protection, HTTP compression, web caching, X-Forwarded-For header injection, debug mode, L7 DDOS profiles, conditional backend group routing, URI/header/cookie-based load balancing algorithms, server/TR7 cookie persistence, dynamic hash-based persistence, bandwidth limiting, QoS resource management (CPU/memory limits), timeout/pool limit/log/notification/report profiles, HTTP traffic actions and conditions support for comprehensive HTTP/HTTPS load balancing) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb service add ?
Описание: Creates a new TCP vService (an L4 TCP stream load balancing service; with SSL termination (end-to-end only), SSL security profiles, conditional backend group routing, roundrobin/leastconn/source/rdp-cookie-based load balancing algorithms, source IP/SSL session ID persistence, QoS resource management (CPU/memory limits), bandwidth limiting, L7 DDOS profiles (with IP whitelist/blacklist), timeout/pool limit/log/notification/report profiles, TCP traffic actions and conditions support for load balancing TCP stream applications) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbPools
Категория: lb / lbPools
Просмотреть документациюlb service set ?
Описание: Performs a complete replacement of a specific TCP vService (an L4 TCP stream load balancing service; with SSL termination (end-to-end only), SSL security profiles, conditional backend group routing, roundrobin/leastconn/source/rdp-cookie-based load balancing algorithms, source IP/SSL session ID persistence, QoS resource management (CPU/memory limits), bandwidth limiting, L7 DDOS profiles (with IP whitelist/blacklist), timeout/pool limit/log/notification/report profiles, TCP traffic actions and conditions support for load balancing TCP stream applications) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb service update ?
Описание: Performs a selective update of a specific TCP vService (an L4 TCP stream load balancing service; with SSL termination (end-to-end only), SSL security profiles, conditional backend group routing, roundrobin/leastconn/source/rdp-cookie-based load balancing algorithms, source IP/SSL session ID persistence, QoS resource management (CPU/memory limits), bandwidth limiting, L7 DDOS profiles (with IP whitelist/blacklist), timeout/pool limit/log/notification/report profiles, TCP traffic actions and conditions support for load balancing TCP stream applications) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb service add ?
Описание: Creates a new Network vService (an L3/L4 network layer load balancing service; with IPVS-based packet-level load balancing, TCP/UDP/ANY protocol support, DSR (Direct Server Return)/NAT/SNAT mode selection, route table-based network isolation, port range support, L4 persistence (connection tracking duration), SIP persistence support, L4 load balancing algorithms (rr/wrr/lc/wlc/lblc/lblcr/sh/dh/sed/nq/mh), frontend IP:port (or IP-only for protocol=ANY) configuration for high-performance low-latency network layer load balancing) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbPools
Категория: lb / lbPools
Просмотреть документациюlb service set ?
Описание: Performs a complete replacement of a specific Network vService (an L3/L4 network layer load balancing service; with IPVS-based packet-level load balancing, TCP/UDP/ANY protocol support, DSR (Direct Server Return)/NAT/SNAT mode selection, route table-based network isolation, port range support, L4 persistence (connection tracking duration), SIP persistence support, L4 load balancing algorithms (rr/wrr/lc/wlc/lblc/lblcr/sh/dh/sed/nq/mh), frontend IP:port (or IP-only for protocol=ANY) configuration for high-performance low-latency network layer load balancing) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb service update ?
Описание: Performs a selective update of a specific Network vService (an L3/L4 network layer load balancing service; with IPVS-based packet-level load balancing, TCP/UDP/ANY protocol support, DSR (Direct Server Return)/NAT/SNAT mode selection, route table-based network isolation, port range support, L4 persistence (connection tracking duration), SIP persistence support, L4 load balancing algorithms (rr/wrr/lc/wlc/lblc/lblcr/sh/dh/sed/nq/mh), frontend IP:port (or IP-only for protocol=ANY) configuration for high-performance low-latency network layer load balancing) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbPools/[id]
Категория: lb / lbPools
Просмотреть документациюlb backend add ?
Описание: Creates a new backend (a real server instance that processes requests distributed from vServices, with health monitoring, connection limits, SSL support, and weight-based load distribution for optimal resource utilization) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbBackends
Категория: lb / lbBackends
Просмотреть документациюlb backend set ?
Описание: Performs a complete replacement of a specific backend (a real server instance that processes requests distributed from vServices, with health monitoring, connection limits, SSL support, and weight-based load distribution for optimal resource utilization) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbBackends/[id]
Категория: lb / lbBackends
Просмотреть документациюlb backend update ?
Описание: Performs a selective update of a specific backend (a real server instance that processes requests distributed from vServices, with health monitoring, connection limits, SSL support, and weight-based load distribution for optimal resource utilization) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbBackends/[id]
Категория: lb / lbBackends
Просмотреть документациюlb hc add ?
Описание: Creates a new TCP health check (a scenario-based TCP connection health monitoring; with customizable TCP handshake and data exchange scenarios using sendText/expectText/expectRegex/wait actions, custom protocol validation, response pattern matching, timing control support for advanced TCP service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific TCP health check (a scenario-based TCP connection health monitoring; with customizable TCP handshake and data exchange scenarios using sendText/expectText/expectRegex/wait actions, custom protocol validation, response pattern matching, timing control support for advanced TCP service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific TCP health check (a scenario-based TCP connection health monitoring; with customizable TCP handshake and data exchange scenarios using sendText/expectText/expectRegex/wait actions, custom protocol validation, response pattern matching, timing control support for advanced TCP service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new PING health check (a simple network reachability check based on ICMP echo request/reply; with host-level availability check, minimum overhead, fast response time measurement for basic network layer health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific PING health check (a simple network reachability check based on ICMP echo request/reply; with host-level availability check, minimum overhead, fast response time measurement for basic network layer health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific PING health check (a simple network reachability check based on ICMP echo request/reply; with host-level availability check, minimum overhead, fast response time measurement for basic network layer health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new HTTP health check (an HTTP/1.1 application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes (200/201/204/301/302/etc.), response content query (regex/substring match), virtual domain (Host header) support for comprehensive HTTP web service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific HTTP health check (an HTTP/1.1 application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes (200/201/204/301/302/etc.), response content query (regex/substring match), virtual domain (Host header) support for comprehensive HTTP web service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific HTTP health check (an HTTP/1.1 application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes (200/201/204/301/302/etc.), response content query (regex/substring match), virtual domain (Host header) support for comprehensive HTTP web service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new HTTPS health check (an SSL/TLS encrypted HTTP application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes, response content query, virtual domain, SSL certificate validation support for secure HTTPS web service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific HTTPS health check (an SSL/TLS encrypted HTTP application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes, response content query, virtual domain, SSL certificate validation support for secure HTTPS web service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific HTTPS health check (an SSL/TLS encrypted HTTP application layer health monitoring; with custom URI path + query, HTTP method (GET/POST/PUT/DELETE/HEAD), custom headers, HTTP body payload, expected status codes, response content query, virtual domain, SSL certificate validation support for secure HTTPS web service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new DNS health check (a DNS resolver health monitoring; with custom DNS query (A/AAAA/CNAME/MX/TXT records), response validation, resolution time measurement support for DNS server availability and response time monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific DNS health check (a DNS resolver health monitoring; with custom DNS query (A/AAAA/CNAME/MX/TXT records), response validation, resolution time measurement support for DNS server availability and response time monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific DNS health check (a DNS resolver health monitoring; with custom DNS query (A/AAAA/CNAME/MX/TXT records), response validation, resolution time measurement support for DNS server availability and response time monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new FTP health check (an FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin - login check only, loginAndList - login + directory listing), custom FTP path, connection/authentication/command execution validation support for FTP service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific FTP health check (an FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin - login check only, loginAndList - login + directory listing), custom FTP path, connection/authentication/command execution validation support for FTP service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific FTP health check (an FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin - login check only, loginAndList - login + directory listing), custom FTP path, connection/authentication/command execution validation support for FTP service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new FTPS health check (an SSL/TLS encrypted FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin/loginAndList), custom FTP path, SSL certificate validation, encrypted connection/authentication/command execution validation support for secure FTPS service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific FTPS health check (an SSL/TLS encrypted FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin/loginAndList), custom FTP path, SSL certificate validation, encrypted connection/authentication/command execution validation support for secure FTPS service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific FTPS health check (an SSL/TLS encrypted FTP server authentication and access control; with username/password authentication, FTP action (onlyLogin/loginAndList), custom FTP path, SSL certificate validation, encrypted connection/authentication/command execution validation support for secure FTPS service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new LDAP health check (an LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, LDAP bind operation validation support for LDAP server availability and authentication service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific LDAP health check (an LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, LDAP bind operation validation support for LDAP server availability and authentication service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific LDAP health check (an LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, LDAP bind operation validation support for LDAP server availability and authentication service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new LDAPS health check (an SSL/TLS encrypted LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, SSL certificate validation, encrypted LDAP bind operation validation support for secure LDAPS server health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific LDAPS health check (an SSL/TLS encrypted LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, SSL certificate validation, encrypted LDAP bind operation validation support for secure LDAPS server health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific LDAPS health check (an SSL/TLS encrypted LDAP directory server authentication control; with username/password credentials, optional LDAP authentication flag, SSL certificate validation, encrypted LDAP bind operation validation support for secure LDAPS server health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new Oracle health check (an Oracle database server health and query execution control; with username/password/connection string authentication, scenario-based SQL query execution (executeCmd/wait actions), expected result text/minimum row count validation, query response time measurement support for Oracle database availability and query execution health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific Oracle health check (an Oracle database server health and query execution control; with username/password/connection string authentication, scenario-based SQL query execution (executeCmd/wait actions), expected result text/minimum row count validation, query response time measurement support for Oracle database availability and query execution health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific Oracle health check (an Oracle database server health and query execution control; with username/password/connection string authentication, scenario-based SQL query execution (executeCmd/wait actions), expected result text/minimum row count validation, query response time measurement support for Oracle database availability and query execution health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc add ?
Описание: Creates a new UDP health check (a scenario-based UDP datagram health monitoring; with customizable UDP packet exchange scenarios using send/wait/expectText/expectRegex actions, data format (text/hex/base64) support, custom protocol validation, response pattern matching, timing control support for advanced UDP service health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbHealthChecks
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc set ?
Описание: Performs a complete replacement of a specific UDP health check (a scenario-based UDP datagram health monitoring; with customizable UDP packet exchange scenarios using send/wait/expectText/expectRegex actions, data format (text/hex/base64) support, custom protocol validation, response pattern matching, timing control support for advanced UDP service health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb hc update ?
Описание: Performs a selective update of a specific UDP health check (a scenario-based UDP datagram health monitoring; with customizable UDP packet exchange scenarios using send/wait/expectText/expectRegex actions, data format (text/hex/base64) support, custom protocol validation, response pattern matching, timing control support for advanced UDP service health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbHealthChecks/[id]
Категория: lb / lbHealthChecks
Просмотреть документациюlb action add ?
Описание: Creates a new Show content instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Show content instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Show content instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Keep header names instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Keep header names instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Keep header names instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Manage HTTP security headers instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Manage HTTP security headers instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Manage HTTP security headers instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new HTTP cookie security instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific HTTP cookie security instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific HTTP cookie security instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new CAPTCHA protection instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific CAPTCHA protection instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific CAPTCHA protection instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Bandwidth limitation instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Bandwidth limitation instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Bandwidth limitation instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Cookie encryption instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Cookie encryption instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Cookie encryption instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new IPFIX log sending instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific IPFIX log sending instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific IPFIX log sending instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Add HTTP header instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Add HTTP header instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Add HTTP header instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Delete HTTP header instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Delete HTTP header instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Delete HTTP header instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Set HTTP header instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Set HTTP header instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Set HTTP header instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Replace HTTP header content instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Replace HTTP header content instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Replace HTTP header content instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Advanced traffic inspection instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Advanced traffic inspection instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Advanced traffic inspection instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Modify response content instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Modify response content instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Modify response content instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new HTTP TCP multiplexing instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific HTTP TCP multiplexing instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific HTTP TCP multiplexing instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new HTTP 1.0 header compatibility instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific HTTP 1.0 header compatibility instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific HTTP 1.0 header compatibility instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Provide Prometheus service instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Provide Prometheus service instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Provide Prometheus service instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Conditional silent log instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Conditional silent log instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Conditional silent log instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new CORS instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific CORS instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific CORS instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Ip log masking instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Ip log masking instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Ip log masking instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Manual action instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Manual action instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Manual action instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Block instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Block instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Block instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Location redirection instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Location redirection instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Location redirection instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new User authentication (On HTTP request) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific User authentication (On HTTP request) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific User authentication (On HTTP request) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Set path instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Set path instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Set path instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Set path + query instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Set path + query instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Set path + query instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new URL normalization instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific URL normalization instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific URL normalization instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Cookie based connection persistency instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Cookie based connection persistency instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Cookie based connection persistency instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new TCP connection management instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific TCP connection management instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific TCP connection management instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Redirect for traffic manager errors instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Redirect for traffic manager errors instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Redirect for traffic manager errors instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Redirect for backend service errors instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Redirect for backend service errors instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Redirect for backend service errors instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Show content for traffic manager errors instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Show content for traffic manager errors instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Show content for traffic manager errors instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Show content for backend service errors instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Show content for backend service errors instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Show content for backend service errors instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Redirect to HTTPS instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Redirect to HTTPS instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Redirect to HTTPS instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action add ?
Описание: Creates a new Quarantine instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbRules
Категория: lb / lbRules
Просмотреть документациюlb action set ?
Описание: Performs a complete replacement of a specific Quarantine instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb action update ?
Описание: Performs a selective update of a specific Quarantine instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbRules/[id]
Категория: lb / lbRules
Просмотреть документациюlb condition add ?
Описание: Creates a new IP intelligence category condition (IP reputation/intelligence-based filtering; with configurable blacklist category selection (botnets, proxies, tor, spam, scanners, malware C&C, etc.), real-time threat intelligence integration, automatic blacklist updates, geo-based threat detection, for IP reputation-based condition matching for security threat mitigation, automated blocking) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific IP intelligence category condition (IP reputation/intelligence-based filtering; with configurable blacklist category selection (botnets, proxies, tor, spam, scanners, malware C&C, etc.), real-time threat intelligence integration, automatic blacklist updates, geo-based threat detection, for IP reputation-based condition matching for security threat mitigation, automated blocking) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific IP intelligence category condition (IP reputation/intelligence-based filtering; with configurable blacklist category selection (botnets, proxies, tor, spam, scanners, malware C&C, etc.), real-time threat intelligence integration, automatic blacklist updates, geo-based threat detection, for IP reputation-based condition matching for security threat mitigation, automated blocking) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP request body condition (HTTP request body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for request payload inspection, JSON/XML content filtering, API request validation, content-based routing, payload security inspection) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP request body condition (HTTP request body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for request payload inspection, JSON/XML content filtering, API request validation, content-based routing, payload security inspection) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP request body condition (HTTP request body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for request payload inspection, JSON/XML content filtering, API request validation, content-based routing, payload security inspection) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP response body condition (HTTP response body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for backend response inspection, JSON/XML response filtering, API response validation, response content-based actions, response pattern detection) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP response body condition (HTTP response body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for backend response inspection, JSON/XML response filtering, API response validation, response content-based actions, response pattern detection) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP response body condition (HTTP response body content matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, body size threshold, for backend response inspection, JSON/XML response filtering, API response validation, response content-based actions, response pattern detection) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new URL list condition (response-based URL list matching condition; with dynamic URL list matching, backend response-based URL validation, list-based routing, URL whitelist/blacklist, dynamic content filtering, response-driven URL validation) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific URL list condition (response-based URL list matching condition; with dynamic URL list matching, backend response-based URL validation, list-based routing, URL whitelist/blacklist, dynamic content filtering, response-driven URL validation) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific URL list condition (response-based URL list matching condition; with dynamic URL list matching, backend response-based URL validation, list-based routing, URL whitelist/blacklist, dynamic content filtering, response-driven URL validation) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Dynamic list (custom dynamic list matching condition; with custom map file usage, dynamic key-value matching, runtime updatable lists, flexible pattern matching, customizable routing logic, dynamic rule sets) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Dynamic list (custom dynamic list matching condition; with custom map file usage, dynamic key-value matching, runtime updatable lists, flexible pattern matching, customizable routing logic, dynamic rule sets) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Dynamic list (custom dynamic list matching condition; with custom map file usage, dynamic key-value matching, runtime updatable lists, flexible pattern matching, customizable routing logic, dynamic rule sets) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP query parameter condition (query parameter matching condition; with configurable parameter name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (parameter existence check), for parameter-based routing, API versioning, feature flag detection, A/B testing routing) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP query parameter condition (query parameter matching condition; with configurable parameter name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (parameter existence check), for parameter-based routing, API versioning, feature flag detection, A/B testing routing) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP query parameter condition (query parameter matching condition; with configurable parameter name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (parameter existence check), for parameter-based routing, API versioning, feature flag detection, A/B testing routing) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new browser condition (browser type detection condition; with multiple browser selection (Chrome, Firefox, Safari, Edge, Opera, IE, etc.), User-Agent header parsing, for browser-based routing, browser-specific optimization, compatibility routing, browser version detection, legacy browser handling) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific browser condition (browser type detection condition; with multiple browser selection (Chrome, Firefox, Safari, Edge, Opera, IE, etc.), User-Agent header parsing, for browser-based routing, browser-specific optimization, compatibility routing, browser version detection, legacy browser handling) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific browser condition (browser type detection condition; with multiple browser selection (Chrome, Firefox, Safari, Edge, Opera, IE, etc.), User-Agent header parsing, for browser-based routing, browser-specific optimization, compatibility routing, browser version detection, legacy browser handling) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new mobile platform condition (mobile platform detection condition; with multiple platform selection (iOS, Android, Windows Phone, etc.), User-Agent parsing, for mobile device detection, responsive routing, mobile-specific routing, platform-based optimization, mobile app integration) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific mobile platform condition (mobile platform detection condition; with multiple platform selection (iOS, Android, Windows Phone, etc.), User-Agent parsing, for mobile device detection, responsive routing, mobile-specific routing, platform-based optimization, mobile app integration) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific mobile platform condition (mobile platform detection condition; with multiple platform selection (iOS, Android, Windows Phone, etc.), User-Agent parsing, for mobile device detection, responsive routing, mobile-specific routing, platform-based optimization, mobile app integration) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new bot type condition (bot type detection condition; with multiple bot selection (Googlebot, Bingbot, crawler, scraper, etc.), User-Agent pattern matching, for bot detection, bot traffic routing, crawler management, bot rate limiting, SEO bot handling, scraper blocking) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific bot type condition (bot type detection condition; with multiple bot selection (Googlebot, Bingbot, crawler, scraper, etc.), User-Agent pattern matching, for bot detection, bot traffic routing, crawler management, bot rate limiting, SEO bot handling, scraper blocking) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific bot type condition (bot type detection condition; with multiple bot selection (Googlebot, Bingbot, crawler, scraper, etc.), User-Agent pattern matching, for bot detection, bot traffic routing, crawler management, bot rate limiting, SEO bot handling, scraper blocking) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP header condition (HTTP header matching condition; with configurable header name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (header existence check), for custom header routing, API key validation, client identification, content negotiation, header-based access control) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP header condition (HTTP header matching condition; with configurable header name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (header existence check), for custom header routing, API key validation, client identification, content negotiation, header-based access control) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP header condition (HTTP header matching condition; with configurable header name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (header existence check), for custom header routing, API key validation, client identification, content negotiation, header-based access control) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP path condition (URL path matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for path-based routing, API endpoint detection, URL pattern filtering, REST API routing, path-based access control) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP path condition (URL path matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for path-based routing, API endpoint detection, URL pattern filtering, REST API routing, path-based access control) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP path condition (URL path matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for path-based routing, API endpoint detection, URL pattern filtering, REST API routing, path-based access control) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP path+query condition (URL path + query string matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for combined path/query routing, parameterized URL patterns, query-aware routing, advanced URL matching) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP path+query condition (URL path + query string matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for combined path/query routing, parameterized URL patterns, query-aware routing, advanced URL matching) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP path+query condition (URL path + query string matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for combined path/query routing, parameterized URL patterns, query-aware routing, advanced URL matching) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP URL condition (full URL matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for complete URL matching including protocol/host/path/query, virtual host routing, domain-based routing, absolute URL filtering) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP URL condition (full URL matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for complete URL matching including protocol/host/path/query, virtual host routing, domain-based routing, absolute URL filtering) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP URL condition (full URL matching condition; with content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for complete URL matching including protocol/host/path/query, virtual host routing, domain-based routing, absolute URL filtering) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new HTTP status code condition (HTTP status code matching condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable code value, for status code-based routing, error page redirection, success/error differentiation, status code filtering, custom error handling) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific HTTP status code condition (HTTP status code matching condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable code value, for status code-based routing, error page redirection, success/error differentiation, status code filtering, custom error handling) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific HTTP status code condition (HTTP status code matching condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable code value, for status code-based routing, error page redirection, success/error differentiation, status code filtering, custom error handling) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new source IP address condition (source IP address matching; with multiple IP matching types: geo-based filtering, manual IP/CIDR list (subnet support), ASN-based (autonomous system number), for flexible source IP matching for geo-targeting, access control, regional traffic management, IP whitelist/blacklist) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific source IP address condition (source IP address matching; with multiple IP matching types: geo-based filtering, manual IP/CIDR list (subnet support), ASN-based (autonomous system number), for flexible source IP matching for geo-targeting, access control, regional traffic management, IP whitelist/blacklist) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific source IP address condition (source IP address matching; with multiple IP matching types: geo-based filtering, manual IP/CIDR list (subnet support), ASN-based (autonomous system number), for flexible source IP matching for geo-targeting, access control, regional traffic management, IP whitelist/blacklist) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new destination IP address condition (destination IP address matching; with single IP address exact match, for destination IP address condition for virtual IP detection, multi-homed server routing, destination-based routing, IP-based service differentiation) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific destination IP address condition (destination IP address matching; with single IP address exact match, for destination IP address condition for virtual IP detection, multi-homed server routing, destination-based routing, IP-based service differentiation) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific destination IP address condition (destination IP address matching; with single IP address exact match, for destination IP address condition for virtual IP detection, multi-homed server routing, destination-based routing, IP-based service differentiation) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new destination port condition (destination port matching; with operator-based comparison (=, !=, >, <, >=, <=), configurable port value, for destination port condition for port-based routing, service port detection, multi-service load balancing, port-based ACL) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific destination port condition (destination port matching; with operator-based comparison (=, !=, >, <, >=, <=), configurable port value, for destination port condition for port-based routing, service port detection, multi-service load balancing, port-based ACL) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific destination port condition (destination port matching; with operator-based comparison (=, !=, >, <, >=, <=), configurable port value, for destination port condition for port-based routing, service port detection, multi-service load balancing, port-based ACL) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new response time condition (backend response time threshold condition; with operator-based comparison (=, !=, >, <, >=, <=), duration value in milliseconds, for slow backend detection, performance-based routing, timeout handling, SLA monitoring, performance threshold alerts) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific response time condition (backend response time threshold condition; with operator-based comparison (=, !=, >, <, >=, <=), duration value in milliseconds, for slow backend detection, performance-based routing, timeout handling, SLA monitoring, performance threshold alerts) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific response time condition (backend response time threshold condition; with operator-based comparison (=, !=, >, <, >=, <=), duration value in milliseconds, for slow backend detection, performance-based routing, timeout handling, SLA monitoring, performance threshold alerts) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new client cookie condition (client cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for session tracking, user identification, cookie-based routing, authentication cookie validation) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific client cookie condition (client cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for session tracking, user identification, cookie-based routing, authentication cookie validation) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific client cookie condition (client cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for session tracking, user identification, cookie-based routing, authentication cookie validation) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new server cookie condition (backend server cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for backend session tracking, server-set cookie inspection, backend authentication validation) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific server cookie condition (backend server cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for backend session tracking, server-set cookie inspection, backend authentication validation) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific server cookie condition (backend server cookie matching condition; with configurable cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for backend session tracking, server-set cookie inspection, backend authentication validation) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Number of active servers (healthy backend server count condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable count value, for healthy backend detection, capacity-based routing, auto-scaling trigger, high availability control, backend pool health monitoring) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Number of active servers (healthy backend server count condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable count value, for healthy backend detection, capacity-based routing, auto-scaling trigger, high availability control, backend pool health monitoring) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Number of active servers (healthy backend server count condition; with operator-based comparison (=, !=, >, <, >=, <=), configurable count value, for healthy backend detection, capacity-based routing, auto-scaling trigger, high availability control, backend pool health monitoring) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new SSL cipher condition (SSL cipher suite matching; with cipher name content matching (exactMatch/start/end/sub/regex), for SSL cipher suite condition for cipher strength validation, weak cipher detection, cipher suite whitelisting, security compliance (PCI DSS, HIPAA), TLS configuration enforcement) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific SSL cipher condition (SSL cipher suite matching; with cipher name content matching (exactMatch/start/end/sub/regex), for SSL cipher suite condition for cipher strength validation, weak cipher detection, cipher suite whitelisting, security compliance (PCI DSS, HIPAA), TLS configuration enforcement) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific SSL cipher condition (SSL cipher suite matching; with cipher name content matching (exactMatch/start/end/sub/regex), for SSL cipher suite condition for cipher strength validation, weak cipher detection, cipher suite whitelisting, security compliance (PCI DSS, HIPAA), TLS configuration enforcement) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new SSL version condition (SSL/TLS protocol version matching; with version content matching (SSLv3, TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3), for SSL/TLS version condition for deprecated protocol detection, TLS version enforcement, security compliance, protocol-based routing, minimum TLS version policy) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific SSL version condition (SSL/TLS protocol version matching; with version content matching (SSLv3, TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3), for SSL/TLS version condition for deprecated protocol detection, TLS version enforcement, security compliance, protocol-based routing, minimum TLS version policy) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific SSL version condition (SSL/TLS protocol version matching; with version content matching (SSLv3, TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3), for SSL/TLS version condition for deprecated protocol detection, TLS version enforcement, security compliance, protocol-based routing, minimum TLS version policy) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new SSL SNI info (SSL SNI information condition; with Server Name Indication sent by client during SSL/TLS handshake, content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for SNI-based virtual hosting, SSL passthrough routing, domain-based SSL routing, multi-tenant SSL configuration) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific SSL SNI info (SSL SNI information condition; with Server Name Indication sent by client during SSL/TLS handshake, content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for SNI-based virtual hosting, SSL passthrough routing, domain-based SSL routing, multi-tenant SSL configuration) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific SSL SNI info (SSL SNI information condition; with Server Name Indication sent by client during SSL/TLS handshake, content matching methods (exactMatch/start/end/sub/regex), case-insensitive option, for SNI-based virtual hosting, SSL passthrough routing, domain-based SSL routing, multi-tenant SSL configuration) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Request size (bytes) (HTTP request size condition; with operator-based comparison (=, !=, >, <, >=, <=), request size in bytes, for large request filtering, upload size limiting, payload size validation, DoS attack mitigation, bandwidth management) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Request size (bytes) (HTTP request size condition; with operator-based comparison (=, !=, >, <, >=, <=), request size in bytes, for large request filtering, upload size limiting, payload size validation, DoS attack mitigation, bandwidth management) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Request size (bytes) (HTTP request size condition; with operator-based comparison (=, !=, >, <, >=, <=), request size in bytes, for large request filtering, upload size limiting, payload size validation, DoS attack mitigation, bandwidth management) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Response size (bytes) (HTTP response size condition; with operator-based comparison (=, !=, >, <, >=, <=), response size in bytes, for large response detection, download size monitoring, bandwidth optimization, response size-based routing, cache decision) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Response size (bytes) (HTTP response size condition; with operator-based comparison (=, !=, >, <, >=, <=), response size in bytes, for large response detection, download size monitoring, bandwidth optimization, response size-based routing, cache decision) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Response size (bytes) (HTTP response size condition; with operator-based comparison (=, !=, >, <, >=, <=), response size in bytes, for large response detection, download size monitoring, bandwidth optimization, response size-based routing, cache decision) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new User authentication (HTTP authentication status condition; with HTTP Basic/Digest authentication success status check, for authenticated user detection, authorization-based routing, protected resource access verification, user authentication validation, security policy enforcement) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific User authentication (HTTP authentication status condition; with HTTP Basic/Digest authentication success status check, for authenticated user detection, authorization-based routing, protected resource access verification, user authentication validation, security policy enforcement) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific User authentication (HTTP authentication status condition; with HTTP Basic/Digest authentication success status check, for authenticated user detection, authorization-based routing, protected resource access verification, user authentication validation, security policy enforcement) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Frontend connection (frontend connection count condition; with operator-based comparison (=, !=, >, <, >=, <=), current connection count, for load-based routing, connection limit enforcement, overload protection, capacity management, connection-based throttling) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Frontend connection (frontend connection count condition; with operator-based comparison (=, !=, >, <, >=, <=), current connection count, for load-based routing, connection limit enforcement, overload protection, capacity management, connection-based throttling) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Frontend connection (frontend connection count condition; with operator-based comparison (=, !=, >, <, >=, <=), current connection count, for load-based routing, connection limit enforcement, overload protection, capacity management, connection-based throttling) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Frontend number of new sessions / s (frontend session rate condition; with operator-based comparison (=, !=, >, <, >=, <=), new sessions per second value, for rate limiting, traffic spike detection, DDoS mitigation, session rate throttling, burst traffic handling) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Frontend number of new sessions / s (frontend session rate condition; with operator-based comparison (=, !=, >, <, >=, <=), new sessions per second value, for rate limiting, traffic spike detection, DDoS mitigation, session rate throttling, burst traffic handling) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Frontend number of new sessions / s (frontend session rate condition; with operator-based comparison (=, !=, >, <, >=, <=), new sessions per second value, for rate limiting, traffic spike detection, DDoS mitigation, session rate throttling, burst traffic handling) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Frontend number of HTTP requests / s (frontend HTTP request rate condition; with operator-based comparison (=, !=, >, <, >=, <=), HTTP requests per second value, for request rate limiting, traffic pattern detection, API throttling, burst protection, request-based load shedding) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Frontend number of HTTP requests / s (frontend HTTP request rate condition; with operator-based comparison (=, !=, >, <, >=, <=), HTTP requests per second value, for request rate limiting, traffic pattern detection, API throttling, burst protection, request-based load shedding) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Frontend number of HTTP requests / s (frontend HTTP request rate condition; with operator-based comparison (=, !=, >, <, >=, <=), HTTP requests per second value, for request rate limiting, traffic pattern detection, API throttling, burst protection, request-based load shedding) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new RDP cookie (RDP cookie condition; with configurable RDP cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for RDP session persistence, RDP load balancing, Terminal Services routing, Windows Remote Desktop load distribution) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific RDP cookie (RDP cookie condition; with configurable RDP cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for RDP session persistence, RDP load balancing, Terminal Services routing, Windows Remote Desktop load distribution) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific RDP cookie (RDP cookie condition; with configurable RDP cookie name, content matching methods (exactMatch/start/end/sub/regex/found), case-insensitive option, found mode (cookie existence check), for RDP session persistence, RDP load balancing, Terminal Services routing, Windows Remote Desktop load distribution) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition add ?
Описание: Creates a new Manual condition (manual HAProxy condition; with custom HAProxy ACL syntax for custom condition definition, advanced HAProxy features access, expert-level condition configuration, flexible custom logic) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbConditions
Категория: lb / lbConditions
Просмотреть документациюlb condition set ?
Описание: Performs a complete replacement of a specific Manual condition (manual HAProxy condition; with custom HAProxy ACL syntax for custom condition definition, advanced HAProxy features access, expert-level condition configuration, flexible custom logic) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb condition update ?
Описание: Performs a selective update of a specific Manual condition (manual HAProxy condition; with custom HAProxy ACL syntax for custom condition definition, advanced HAProxy features access, expert-level condition configuration, flexible custom logic) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbConditions/[id]
Категория: lb / lbConditions
Просмотреть документациюlb certificate add ?
Описание: Creates a new ACME.sh instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbCertificates
Категория: lb / lbCertificates
Просмотреть документациюlb certificate set ?
Описание: Performs a complete replacement of a specific ACME.sh instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb certificate update ?
Описание: Performs a selective update of a specific ACME.sh instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb certificate add ?
Описание: Creates a new manual instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbCertificates
Категория: lb / lbCertificates
Просмотреть документациюlb certificate set ?
Описание: Performs a complete replacement of a specific manual instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb certificate update ?
Описание: Performs a selective update of a specific manual instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb certificate add ?
Описание: Creates a new PFX instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/lbCertificates
Категория: lb / lbCertificates
Просмотреть документациюlb certificate set ?
Описание: Performs a complete replacement of a specific PFX instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb certificate update ?
Описание: Performs a selective update of a specific PFX instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/lbCertificates/[id]
Категория: lb / lbCertificates
Просмотреть документациюlb ca add ?
Описание: Creates a new certificate authority profile (a stored root or intermediate CA certificate that can be referenced when configuring SSL certificates to establish the certificate chain of trust) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbCertificateAuthorities
Категория: lb / profiles
Просмотреть документациюlb ca set ?
Описание: Performs a complete replacement of a specific certificate authority profile (a stored root or intermediate CA certificate that can be referenced when configuring SSL certificates to establish the certificate chain of trust) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbCertificateAuthorities/[id]
Категория: lb / profiles
Просмотреть документациюlb ca update ?
Описание: Performs a selective update of a specific certificate authority profile (a stored root or intermediate CA certificate that can be referenced when configuring SSL certificates to establish the certificate chain of trust) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbCertificateAuthorities/[id]
Категория: lb / profiles
Просмотреть документациюlb cache add ?
Описание: Creates a new cache profile (an HTTP caching configuration that accelerates content delivery by storing backend responses with configurable expiration timeout, size limits, conditional caching rules, and dynamic cache key generation using custom variables for granular control) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbCaches
Категория: lb / profiles
Просмотреть документациюlb cache set ?
Описание: Performs a complete replacement of a specific cache profile (an HTTP caching configuration that accelerates content delivery by storing backend responses with configurable expiration timeout, size limits, conditional caching rules, and dynamic cache key generation using custom variables for granular control) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbCaches/[id]
Категория: lb / profiles
Просмотреть документациюlb cache update ?
Описание: Performs a selective update of a specific cache profile (an HTTP caching configuration that accelerates content delivery by storing backend responses with configurable expiration timeout, size limits, conditional caching rules, and dynamic cache key generation using custom variables for granular control) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbCaches/[id]
Категория: lb / profiles
Просмотреть документациюlb compression add ?
Описание: Creates a new compression profile (a configuration that reduces bandwidth usage and speeds up content delivery by compressing responses using algorithms like gzip or brotli with adjustable compression levels and MIME type filtering) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbCompressions
Категория: lb / profiles
Просмотреть документациюlb compression set ?
Описание: Performs a complete replacement of a specific compression profile (a configuration that reduces bandwidth usage and speeds up content delivery by compressing responses using algorithms like gzip or brotli with adjustable compression levels and MIME type filtering) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbCompressions/[id]
Категория: lb / profiles
Просмотреть документациюlb compression update ?
Описание: Performs a selective update of a specific compression profile (a configuration that reduces bandwidth usage and speeds up content delivery by compressing responses using algorithms like gzip or brotli with adjustable compression levels and MIME type filtering) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbCompressions/[id]
Категория: lb / profiles
Просмотреть документациюlb log add ?
Описание: Creates a new log profile (a configuration for sending vService access and error logs to external log servers with configurable destination addresses, sampling rates, log standards like RFC3164 or RFC5424, and custom line formats supporting CEF and JSON structured logging for SIEM integration) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbLogs
Категория: lb / profiles
Просмотреть документациюlb log set ?
Описание: Performs a complete replacement of a specific log profile (a configuration for sending vService access and error logs to external log servers with configurable destination addresses, sampling rates, log standards like RFC3164 or RFC5424, and custom line formats supporting CEF and JSON structured logging for SIEM integration) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbLogs/[id]
Категория: lb / profiles
Просмотреть документациюlb log update ?
Описание: Performs a selective update of a specific log profile (a configuration for sending vService access and error logs to external log servers with configurable destination addresses, sampling rates, log standards like RFC3164 or RFC5424, and custom line formats supporting CEF and JSON structured logging for SIEM integration) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbLogs/[id]
Категория: lb / profiles
Просмотреть документациюlb notification add ?
Описание: Creates a new notification profile (an alerting configuration that notifies administrators via SNMP, email, or UI about critical events including backend and frontend service status changes, performance threshold breaches for bandwidth/requests/sessions/connections, and certificate expiration warnings) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbNotifications
Категория: lb / profiles
Просмотреть документациюlb notification set ?
Описание: Performs a complete replacement of a specific notification profile (an alerting configuration that notifies administrators via SNMP, email, or UI about critical events including backend and frontend service status changes, performance threshold breaches for bandwidth/requests/sessions/connections, and certificate expiration warnings) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbNotifications/[id]
Категория: lb / profiles
Просмотреть документациюlb notification update ?
Описание: Performs a selective update of a specific notification profile (an alerting configuration that notifies administrators via SNMP, email, or UI about critical events including backend and frontend service status changes, performance threshold breaches for bandwidth/requests/sessions/connections, and certificate expiration warnings) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbNotifications/[id]
Категория: lb / profiles
Просмотреть документациюlb page add ?
Описание: Creates a new page content (a custom content definition with configurable MIME type and dynamic content supporting variables, used for custom error pages, custom responses, or content injection by actions) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbPageContents
Категория: lb / profiles
Просмотреть документациюlb page set ?
Описание: Performs a complete replacement of a specific page content (a custom content definition with configurable MIME type and dynamic content supporting variables, used for custom error pages, custom responses, or content injection by actions) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbPageContents/[id]
Категория: lb / profiles
Просмотреть документациюlb page update ?
Описание: Performs a selective update of a specific page content (a custom content definition with configurable MIME type and dynamic content supporting variables, used for custom error pages, custom responses, or content injection by actions) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbPageContents/[id]
Категория: lb / profiles
Просмотреть документациюlb limits add ?
Описание: Creates a new frontend limits profile (a protection configuration that prevents vService resource exhaustion by setting maximum thresholds for concurrent connections, connection rates, session rates, SSL connections, retry attempts, and buffer sizes to mitigate DoS attacks and ensure stable operation) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbPoolLimits
Категория: lb / profiles
Просмотреть документациюlb limits set ?
Описание: Performs a complete replacement of a specific frontend limits profile (a protection configuration that prevents vService resource exhaustion by setting maximum thresholds for concurrent connections, connection rates, session rates, SSL connections, retry attempts, and buffer sizes to mitigate DoS attacks and ensure stable operation) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbPoolLimits/[id]
Категория: lb / profiles
Просмотреть документациюlb limits update ?
Описание: Performs a selective update of a specific frontend limits profile (a protection configuration that prevents vService resource exhaustion by setting maximum thresholds for concurrent connections, connection rates, session rates, SSL connections, retry attempts, and buffer sizes to mitigate DoS attacks and ensure stable operation) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbPoolLimits/[id]
Категория: lb / profiles
Просмотреть документациюlb report add ?
Описание: Creates a new report profile (a configuration for generating and delivering scheduled performance reports with customizable sections, frontend and backend statistics graphs, export formats including PDF, XLSX, and CSV, and email delivery options with daily, weekly, or monthly frequency) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbReports
Категория: lb / profiles
Просмотреть документациюlb report set ?
Описание: Performs a complete replacement of a specific report profile (a configuration for generating and delivering scheduled performance reports with customizable sections, frontend and backend statistics graphs, export formats including PDF, XLSX, and CSV, and email delivery options with daily, weekly, or monthly frequency) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbReports/[id]
Категория: lb / profiles
Просмотреть документациюlb report update ?
Описание: Performs a selective update of a specific report profile (a configuration for generating and delivering scheduled performance reports with customizable sections, frontend and backend statistics graphs, export formats including PDF, XLSX, and CSV, and email delivery options with daily, weekly, or monthly frequency) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbReports/[id]
Категория: lb / profiles
Просмотреть документациюlb ssl-security add ?
Описание: Creates a new SSL security profile (a configuration defining allowed TLS protocol versions, cipher algorithm suites, ECDHE curves, TLS ticket behavior, and hardware acceleration options to control SSL/TLS connection security and performance) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbSecurities
Категория: lb / profiles
Просмотреть документациюlb ssl-security set ?
Описание: Performs a complete replacement of a specific SSL security profile (a configuration defining allowed TLS protocol versions, cipher algorithm suites, ECDHE curves, TLS ticket behavior, and hardware acceleration options to control SSL/TLS connection security and performance) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbSecurities/[id]
Категория: lb / profiles
Просмотреть документациюlb ssl-security update ?
Описание: Performs a selective update of a specific SSL security profile (a configuration defining allowed TLS protocol versions, cipher algorithm suites, ECDHE curves, TLS ticket behavior, and hardware acceleration options to control SSL/TLS connection security and performance) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbSecurities/[id]
Категория: lb / profiles
Просмотреть документациюlb timeouts add ?
Описание: Creates a new timeout profile (a configuration controlling connection lifecycle including HTTP keepalive, request/response timeouts, backend connection establishment, client inactivity, queueing, WebSocket tunnels, and TCP FIN handling to prevent resource exhaustion and optimize performance) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /lb/profiles/lbTimeouts
Категория: lb / profiles
Просмотреть документациюlb timeouts set ?
Описание: Performs a complete replacement of a specific timeout profile (a configuration controlling connection lifecycle including HTTP keepalive, request/response timeouts, backend connection establishment, client inactivity, queueing, WebSocket tunnels, and TCP FIN handling to prevent resource exhaustion and optimize performance) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /lb/profiles/lbTimeouts/[id]
Категория: lb / profiles
Просмотреть документациюlb timeouts update ?
Описание: Performs a selective update of a specific timeout profile (a configuration controlling connection lifecycle including HTTP keepalive, request/response timeouts, backend connection establishment, client inactivity, queueing, WebSocket tunnels, and TCP FIN handling to prevent resource exhaustion and optimize performance) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /lb/profiles/lbTimeouts/[id]
Категория: lb / profiles
Просмотреть документациюv-device add ?
Описание: Creates a new vDevice (a virtual device providing tenant isolation with dedicated CPU cores, memory allocation, network interfaces, and separate storage for application data and logging, enabling secure multi-tenant operation with complete resource separation and independent network namespaces) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /zones
Категория: zones /
Просмотреть документациюv-device set ?
Описание: Performs a complete replacement of a specific vDevice (a virtual device providing tenant isolation with dedicated CPU cores, memory allocation, network interfaces, and separate storage for application data and logging, enabling secure multi-tenant operation with complete resource separation and independent network namespaces) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /zones/[id]
Категория: zones /
Просмотреть документациюv-device update ?
Описание: Performs a selective update of a specific vDevice (a virtual device providing tenant isolation with dedicated CPU cores, memory allocation, network interfaces, and separate storage for application data and logging, enabling secure multi-tenant operation with complete resource separation and independent network namespaces) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /zones/[id]
Категория: zones /
Просмотреть документациюusers add ?
Описание: Creates a new user account (a system user with role-based access control supporting local and LDAP authentication, configurable permissions for vDevices, vServices, backends, and certificates, SSH and web CLI access options, and granular resource restrictions for multi-tenant environments) instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /users
Категория: users /
Просмотреть документациюusers set ?
Описание: Performs a complete replacement of a specific user account (a system user with role-based access control supporting local and LDAP authentication, configurable permissions for vDevices, vServices, backends, and certificates, SSH and web CLI access options, and granular resource restrictions for multi-tenant environments) instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /users/[username]
Категория: users /
Просмотреть документациюusers update ?
Описание: Performs a selective update of a specific user account (a system user with role-based access control supporting local and LDAP authentication, configurable permissions for vDevices, vServices, backends, and certificates, SSH and web CLI access options, and granular resource restrictions for multi-tenant environments) instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /users/[username]
Категория: users /
Просмотреть документациюsettings access show ?
Описание: Retrieves the complete current configuration of access configuration (system access control managing HTTP(S), SSH, FTP, and SNMP interfaces with IP/port bindings, network whitelisting, CAPTCHA and two-factor authentication protection, session duration limits, failed login rate limiting with IP-based quarantine, and system user permissions for secure administrative access). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/access
Категория: settings / access
Просмотреть документациюsettings access update ?
Описание: Performs a selective update of access configuration (system access control managing HTTP(S), SSH, FTP, and SNMP interfaces with IP/port bindings, network whitelisting, CAPTCHA and two-factor authentication protection, session duration limits, failed login rate limiting with IP-based quarantine, and system user permissions for secure administrative access) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/access
Категория: settings / access
Просмотреть документациюsettings ntp show ?
Описание: Retrieves the complete current configuration of NTP settings. This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/ntp
Категория: settings / ntp
Просмотреть документациюsettings ntp update ?
Описание: Performs a selective update of NTP settings configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/ntp
Категория: settings / ntp
Просмотреть документациюsettings localization show ?
Описание: Retrieves the complete current configuration of localization configuration (system branding and internationalization settings including company name, hostname, default UI language selection, and custom logo upload for personalized administrative interface appearance). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/localization
Категория: settings / localization
Просмотреть документациюsettings localization update ?
Описание: Performs a selective update of localization configuration (system branding and internationalization settings including company name, hostname, default UI language selection, and custom logo upload for personalized administrative interface appearance) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/localization
Категория: settings / localization
Просмотреть документациюsettings ldap show ?
Описание: Retrieves the complete current configuration of LDAP configuration (external LDAP authentication integration with server connection settings, TLS encryption, principal pattern for username binding, base DN, optional bind restriction filters, and service account configuration for querying user email and phone fields). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/ldap
Категория: settings / ldap
Просмотреть документациюsettings ldap update ?
Описание: Performs a selective update of LDAP configuration (external LDAP authentication integration with server connection settings, TLS encryption, principal pattern for username binding, base DN, optional bind restriction filters, and service account configuration for querying user email and phone fields) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/ldap
Категория: settings / ldap
Просмотреть документациюsettings radius show ?
Описание: Retrieves the complete current configuration of Radius configuration (RADIUS protocol integration with server host, port, and shared secret settings providing centralized authentication, authorization, and accounting for network devices). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/radius
Категория: settings / radius
Просмотреть документациюsettings radius update ?
Описание: Performs a selective update of Radius configuration (RADIUS protocol integration with server host, port, and shared secret settings providing centralized authentication, authorization, and accounting for network devices) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/radius
Категория: settings / radius
Просмотреть документациюsettings tacacs show ?
Описание: Retrieves the complete current configuration of TACACS configuration (centralized AAA (Authentication, Authorization, Accounting) integration for administrative access with server host and port settings, shared secret authentication, and optional accounting feature with username, password, service name, protocol, and language settings). This is a singleton resource, meaning there is only one instance in the system. The response includes all configuration fields with their current values. This operation is read-only and does not modify any data.
Конечная точка REST API: GET /settings/tacacs
Категория: settings / tacacs
Просмотреть документациюsettings tacacs update ?
Описание: Performs a selective update of TACACS configuration (centralized AAA (Authentication, Authorization, Accounting) integration for administrative access with server host and port settings, shared secret authentication, and optional accounting feature with username, password, service name, protocol, and language settings) configuration. This operation uses shallow merging - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended approach when you want to change specific settings without affecting the rest of the configuration. The request body is merged at the first level with the existing configuration, then the complete updated configuration is returned in the response.
Конечная точка REST API: PATCH /settings/tacacs
Категория: settings / tacacs
Просмотреть документациюsettings notification entry add ?
Описание: Creates a new settings.notificationMgmt.notificationEntries instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /settings/notificationMgmt/notificationEntries
Категория: settings / notificationMgmt
Просмотреть документациюsettings notification entry set ?
Описание: Performs a complete replacement of a specific settings.notificationMgmt.notificationEntries instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /settings/notificationMgmt/notificationEntries/[id]
Категория: settings / notificationMgmt
Просмотреть документациюsettings notification entry update ?
Описание: Performs a selective update of a specific settings.notificationMgmt.notificationEntries instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /settings/notificationMgmt/notificationEntries/[id]
Категория: settings / notificationMgmt
Просмотреть документациюsettings notification contact add ?
Описание: Creates a new settings.notificationMgmt.contactGroups instance with the provided configuration. You must supply all required fields in the request body. The system will generate a unique identifier for the new instance. The response includes the complete configuration of the newly created instance, including any auto-generated fields. This operation adds a new entry to the collection without affecting existing instances.
Конечная точка REST API: POST /settings/notificationMgmt/contactGroups
Категория: settings / notificationMgmt
Просмотреть документациюsettings notification contact set ?
Описание: Performs a complete replacement of a specific settings.notificationMgmt.contactGroups instance identified by its ID. This is a full update operation where all required fields must be provided in the request body. Any fields not included will be reset to their default values. The instance ID cannot be changed. Use this when you want to ensure the instance has a specific, known configuration, replacing all previous settings. The response contains the updated instance as it was saved.
Конечная точка REST API: PUT /settings/notificationMgmt/contactGroups/[id]
Категория: settings / notificationMgmt
Просмотреть документациюsettings notification contact update ?
Описание: Performs a selective update of a specific settings.notificationMgmt.contactGroups instance identified by its ID. This operation uses shallow merging at the first level - only the fields you include in the request body will be modified, while all other fields retain their current values. This is the recommended and most efficient approach when you want to change specific settings of an instance without affecting the rest of its configuration. The instance ID cannot be changed. The response contains the complete updated configuration after the merge operation.
Конечная точка REST API: PATCH /settings/notificationMgmt/contactGroups/[id]
Категория: settings / notificationMgmt
Просмотреть документацию